The compound base material Nylon 66 Resin(from Shenma)
Nylon 66 resin has excellent heat resistance, chemical resistance, strength, and processing convenience. It can meet the requirements of products such as ties, coil frames, and terminal blocks without modification.
Key words:
Category:
Advantage products
产品附件:
Hotline:
The compound base material Nylon 66 Resin(from Shenma)
Graphic details
| Property | Units | Test Method | EPR22 | EPR24 | EPR24D | EPR26H |
| Density | kg/dm3 | ISO 1183 | 1.14 | 1.14 | 1.14 | 1.14 |
| Performance density | kg/dm3 | QB | 0.6-0.7 | 0.6-0.7 | 0.6-0.7 | 0.6-0.7 |
| Granularity | g/100grain | QB | 1.2-2.0 | 1.2-2.0 | 1.2-2.0 | 1.2-2.0 |
| Relative viscosity | 一 | QB | 2.20-2.30 | 2.32-2.42 | 2.32-2.42 | 2.65-2.75 |
| Moisture content | % m/m | QB | ≤ 0.6 | ≤ 0.6 | ≤ 0.2 | ≤ 0.6 |
| Terminal amine group | meq/kg | QB | 一 | 一 | 一 | 85-95 |
| B-value | 一 | QB | ≤ 1 | ≤ 1 | ≤ 1 | ≤ 1 |
| Melting point | °C | ISO 11357 | 258-262 | 258-262 | 258-262 | 258-262 |
| Product brief introduction | Ultra low viscosity, good flowability, modified | Low viscosity, good flowability, modified | Low viscosity, good fluidity, low moisture, modified, suitable for external lubrication | Ultra high amino, medium viscosity, modified |
| Property | Units | Test Method | EPR27 | EPR32D | EPR34 |
| Density | kg/dm3 | ISO 1183 | 1.14 | 1.14 | 1.14 |
| Performance density | kg/dm3 | QB | 0.6-0.7 | 0.6-0.7 | 0.6-0.7 |
| Granularity | g/100grain | QB | 1.2-2.0 | 1.2-2.0 | 1.2-2.0 |
| Relative viscosity | 一 | QB | 2.62-2.72 | 3.10-3.20 | 3.35-3.45 |
| Moisture content | % m/m | QB | ≤ 0.6 | ≤ 0.09 | ≤ 0.6 |
| Terminal amine group | meq/kg | QB | 一 | 一 | 一 |
| B-value | 一 | QB | ≤ 1 | ≤ 1 | ≤ 1 |
| Melting point | °C | ISO 11357 | 258-262 | 258-262 | 258-262 |
| Product brief introduction | Medium viscosity, modified | High viscosity, modified or extruded, low moisture content, suitable for flame retardant modification | High viscosity, modified or molded extrusion |
|
Usage suggestions
|
1.General precautions 2.① Before use, users should confirm the "Shenma" logo on the product packaging and confirm that the packaging is intact and undamaged. ② Please confirm that the product is packaged in aluminum foil for dry slicing. If the product cannot be used up within one hour, effective measures should be taken to seal it to prevent moisture regain. ③ Please store the product in a cool, dry and well ventilated place to prevent exposure to sunlight, rain, and keep away from ignition sources. |
![]() |
2. Modified processing conditions Processing temperature: 275-310 ° C 3. Safety instructions ① Fire protection measures Nylon 66 resin, like most organic substances, has a self ignition temperature of over 400 ° C; The polymer is not easy to ignite. In case of fire, water mist, foam, carbon dioxide and chemical dry powder can be used to extinguish the fire. ② First aid measures Once inhaling excessive combustion mist, please move to an open and ventilated area and consult a doctor. Once a burn is accidentally caused by molten material, the material must be cooled as quickly as possible in the cooling water, but not stirred, and medical examination must be conducted immediately. |
Special note: The information and suggestions mentioned in the above data sheet (referred to as ("this information") are provided by our company in good faith, but this information is only for customer reference and is not used as a supplier's quality assurance. Shenma makes no warranty, express or implied, and does not assume any responsibility in connection with or use of this information regarding the completeness and accuracy of this information.
Previous page
Previous page
Injection Grading Nylon 66 Resin(from Shenma)




