Injection Grading Nylon 66 Resin(from Shenma)
Nylon 66 resin has excellent heat resistance, chemical resistance, strength and processing convenience. It can meet the requirements of products such as ties, coil frames, and terminal blocks without modification.
Key words:
Category:
Advantage products
产品附件:
Hotline:
Injection Grading Nylon 66 Resin(from Shenma)
Graphic details
Nylon 66 resin has excellent heat resistance, chemical resistance, strength and processing convenience. It can meet the requirements of products such as ties, coil frames, and terminal blocks without modification.
Main indicators
| Property | Units | Test Method | EPR24 | EPR2701 | EPR2702 | EPR2703 |
| Density | kg/dm3 | ISO 1183 | 1.14 | 1.14 | 1.14 | 1.14 |
| Performance density | kg/dm3 | QB | 0.6-0.7 | 0.6-0.7 | 0.6-0.7 | 0.6-0.7 |
| Granularity | g/100grain | QB | 1.2-2.0 | 1.2-2.0 | 1.2-2.0 | 1.2-2.0 |
| Relative viscosity | 一 | QB | 2.32-2.42 | 2.55-2.65 | 2.55-2.65 | 2.55-2.65 |
| Moisture content | % m/m | QB | ≤ 0.6 | ≤ 0.2 | ≤ 0.2 | ≤ 0.2 |
| Terminal amine group | ppm | QB | 一 | 一 | 一 | 一 |
| B-value | 一 | QB | ≤ 1 | ≤ 1 | ≤ 1 | ≤ 1 |
| Melting point | °C | ISO 11357 | 258-262 | 258-262 | 258-262 | 258-262 |
| Product brief introduction | Ordinary injection molding grade, low viscosity, good flowability, no lubrication | Injection molding grade, rapid prototyping, medium viscosity, with inner and outer lubricants | Injection molding grade, rapid prototyping, medium viscosity, with inner and outer lubricants | Injection grade, medium viscosity, with external lubricant |
| Property | Units | Test Method | EPR27LS | EPR27FS | EPR27HSL | EPR27 | EPR27T03 |
| Density | kg/dm3 | ISO 1183 | 1.14 | 1.14 | 1.14 | 1.14 | 1.14 |
| Performance density | kg/dm3 | QB | 0.6-0.7 | 0.6-0.7 | 0.6-0.7 | 0.6-0.7 | 0.6-0.7 |
| Granularity | g/100grain | QB | 1.2-2.0 | 1.2-2.0 | 1.2-2.0 | 1.2-2.0 | 1.2-2.0 |
| Relative viscosity | 一 | QB | 2.55-2.65 | 2.55-2.65 | 2.55-2.65 | 2.62-2.72 | 2.62-2.72 |
| Moisture content | % m/m | QB | ≤ 0.2 | ≤ 0.2 | ≤ 0.2 | ≤ 0.6 | ≤ 0.6 |
| Terminal amine group | ppm | QB | 一 | 一 | 100 | 一 | 一 |
| B-value | 一 | QB | ≤ 1 | ≤ 1 | ≤ 1 | ≤ 1 | 一 |
| Melting point | °C | ISO 11357 | 258-262 | 258-262 | 258-262 | 258-262 | 258-262 |
| Product brief introduction | Injection molding grade, rapid prototyping, medium viscosity, with inner and outer lubricants, high fluidity | Injection molding grade, rapid prototyping, medium viscosity, with inner and outer lubricants, high fluidity | Injection grade, good thermal stability, medium viscosity, with internal and external lubricants | Ordinary injection grade, medium viscosity, without lubrication | Ordinary injection grade, medium viscosity, non lubricated, semi matte |
| Usage suggestions | 1.General precautions 2.① Before use, users should confirm the "Shenma" logo on the product packaging and confirm that the packaging is intact and undamaged. ② Please confirm that the product is packaged in aluminum foil for dry slicing. If the product cannot be used up within one hour, effective measures should be taken to seal it to prevent moisture regain. ③ Please store the product in a cool, dry and well ventilated place to prevent exposure to sunlight, rain, and keep away from ignition sources. |
![]() |
2. Injection molding processing conditions ① Drying process: drying temperature 80-100 ℃; Drying time 4-10 hours; Moisture content ≤ 0.2%. ② Injection temperature: Melt temperature range: 275-305 ℃ Optimal melt temperature: 290 ℃ Mold temperature range: 40-90 ℃ Optimal mold temperature: 70 ℃ To obtain the optimal injection molding process conditions, it is also necessary to refer to equipment characteristics such as injection molding machine capacity, screw design, mold design, and material retention time. |
| 3. Safety instructions ① Fire protection measures Nylon 66 resin, like most organic substances, has a self ignition temperature of over 400 ° C; The polymer is not easy to ignite. In case of fire, water mist, foam, carbon dioxide and chemical dry powder can be used to extinguish the fire. ② First aid measures Once inhaling excessive combustion mist, please move to an open and ventilated area and consult a doctor. Once a burn is accidentally caused by molten material, the material must be cooled as quickly as possible in the cooling water, but not stirred, and medical examination must be conducted immediately. |
Special note: The information and suggestions mentioned in the above data sheet (referred to as ("this information") are provided by our company in good faith, but this information is only for customer reference and is not used as a supplier's quality assurance. Shenma makes no warranty, express or implied, and does not assume any responsibility in connection with or use of this information regarding the completeness and accuracy of this information.
Previous page
Next page
Previous page
Special Type Nylon Resin(from Shenma)
Next page




