Regenerated PA6 Resin
Product brief Introduction:Glossy, low viscosity, injection molding, modified base material
Key words:
Category:
Low carbon renewable products
产品附件:
Hotline:
Regenerated PA6 Resin
Graphic details
|
Property |
Units |
Test Method |
Test Conditions |
RBS111 | RBS211 | RBS121 |
|
Density |
g/cm3 | ISO 1183 | 23°C,Dry | 1.13 | 1.13 | 1.13 |
|
Strength at Break |
Mpa | ISO 527 | 23°C,Dry | 69 | 65 | 64 |
|
Strain at Break |
% | ISO 527 | 23°C,Dry | 25 | 24 | 24 |
|
Flexural Strength |
Mpa | ISO 178 | 23°C,Dry | 80 | 78 | 78 |
|
Flexural Modulus |
Gpa | ISO 178 | 23°C,Dry | 2.3 | 2.2 | 2.2 |
|
Notched Charpy Impact Strength |
KJ/m2 | ISO 179 | 23°C,Dry | 3.8 | 3.7 | 3.8 |
|
Product brief introduction |
Glossy, low viscosity, injection molding, modified base material | Glossy, low viscosity, injection molding, modified base material | Black, low viscosity, injection molded, modified base material | |||
Processing conditions »
![]() |
Drying process
─────────────────
dry temperature is 80-110℃ ,
drying time is 4-6 hours,
Moisture content is less than
or equal to 0.2%
|
Injection temperature ───────────────── Melt temperature range:220-240℃
Mold temperature range:40-90℃
Optimum mold temperature:70℃
|
Previous page
Next page
Previous page
There is no
Next page




