Spinning Grade Nylon 66 Resin(from Shenma)
Nylon 66 resin has excellent heat resistance, chemical resistance, strength, and processing convenience. It can meet the requirements of products such as ties, coil frames, and terminal blocks without modification.
Key words:
Category:
Advantage products
产品附件:
Hotline:
Spinning Grade Nylon 66 Resin(from Shenma)
Graphic details
Nylon 66 resin has excellent heat resistance, chemical resistance, strength, and processing convenience. It can meet the requirements of products such as ties, coil frames, and terminal blocks without modification.
Main indicators
| Property | Units | Test Method | FYR25F | FYR25T03CL | FYR25T15CL | FYR25C |
| Density | kg/dm3 | ISO 1183 | 1.14 | 1.14 | 1.14 | 1.14 |
| Performance density | kg/dm3 | QB | 0.6-0.7 | 0.6-0.7 | 0.6-0.7 | 0.6-0.7 |
| Granularity | g/100grain | QB | 1.2-2.0 | 1.2-2.0 | 1.2-2.0 | 1.2-2.0 |
| Relative viscosity | 一 | QB | 2.48-2.58 | 2.48-2.58 | 2.48-2.58 | 2.45-2.55 |
| Moisture content | % m/m | QB | ≤ 0.6 | ≤ 0.6 | ≤ 0.6 | ≤ 0.6 |
| Terminal amine group | meq/kg | QB | 42-52 | 42-52 | 42-52 | 25-35 |
| Copper Content | ppm | QB | 一 | 一 | 一 | 一 |
| B-value | 一 | QB | ≤ 1 | 一 | 一 | ≤ 1 |
| Melting poin | °C | ISO 11357 | 258-262 | 258-262 | 258-262 | 258-262 |
| Product brief introduction | High gloss, low viscosity, melt spinning, spinning POY, FDY, HOY | Semi dull, low viscosity, melt spinning, spinning POY, FDY,. HOY | Full extinction, low viscosity, melt spinning, spinning POY, FDY, HOY | High gloss, low viscosity, melt spinning, low amino, light dyeing, spinning short fibers, tow |
| Property | Units | Test Method | FYR26HD | FYR27 | FYR27D | FYR27F |
| Density | kg/dm3 | ISO 1183 | 1.14 | 1.14 | 1.14 | 1.14 |
| Performance density | kg/dm3 | QB | 0.6-0.7 | 0.6-0.7 | 0.6-0.7 | 0.6-0.7 |
| Granularity | g/100grain | QB | 1.2-2.0 | 1.2-2.0 | 1.2-2.0 | 1.2-2.0 |
| Relative viscosity | 一 | QB | 2.55-2.65 | 2.60-2.70 | 2.65-2.75 | 2.60-2.70 |
| Moisture content | % m/m | QB | ≤ 0.09 | ≤ 0.6 | ≤ 0.09 | ≤ 0.6 |
| Terminal amine group | meq/kg | QB | 62-72 | 42-52 | 42-52 | 42-52 |
| Copper Content | ppm | QB | 一 | 一 | 一 | 一 |
| B-value | 一 | QB | ≤ 1 | ≤ 1 | ≤ 1 | ≤ 1 |
| Melting point | °C | ISO 11357 | 258-262 | 258-262 | 258-262 | 258-262 |
| Product brief introduction | High gloss, medium viscosity, melt spinning, high amino 'deep dyeing, spinning short fibers and tow | High gloss, medium viscosity, melt spinning, spinning brown silk, short fibers, tow, carpet silk, and can also be used as modified base materials | High gloss, medium viscosity, melt spinning, spinning brown silk, staple fiber, tow, carpet silk | High gloss, medium viscosity, melt spinning, carpet spinning |
| Property | Units | Test Method | FYR26K | FYR32K | EPR32D | EPR34 |
| Density | kg/dm3 | ISO 1183 | 1.14 | 1.14 | 1.14 | 1.14 |
| Performance density | kg/dm3 | QB | 0.6-0.7 | 0.6-0.7 | 0.6-0.7 | 0.6-0.7 |
| Granularity | g/100grain | QB | 1.2-2.0 | 1.2-2.0 | 1.2-2.0 | 1.2-2.0 |
| Relative viscosity | 一 | QB | 2.45-2.55 | 2.57-2.67 | 3.10-3.20 | 3.35-3.45 |
| Moisture content | % m/m | QB | ≤ 0.6 | ≤ 0.6 | ≤ 0.09 | ≤ 0.6 |
| Terminal amine group | meq/kg | QB | 42-52 | 一 | 一 | 一 |
| Copper Content | ppm | QB | 55-75 | 55-65 | 一 | 一 |
| B-value | 一 | QB | ≤ 1 | ≤ 1 | ≤ 1 | ≤ 1 |
| Melting point | °C | ISO 11357 | 258-262 | 258-262 | 258-262 | 258-262 |
| Product brief introduction | High gloss, medium viscosity, melt spinning, good thermal stability, spinning machine combined yarn, airbag yarn | High gloss, medium viscosity, melt spinning, good thermal stability, suitable for spinning airbag and industrial fibers | High gloss, high viscosity, melt spinning, monofilament, etc | High gloss, high viscosity, melt spinning, monofilament, etc |
Usage suggestions
1. General precautions
① Before use, users should confirm the "Shenma" logo on the product packaging and confirm that the packaging is intact and undamaged.
② Please confirm that the product is packaged in aluminum foil for dry slicing. If the product cannot be used up within one hour, effective measures should be taken to seal it to prevent moisture regain.
③ Please store the product in a cool, dry and well ventilated place to prevent exposure to sunlight, rain, and keep away from ignition sources.
2. Spinning process reference
Equipment conditions: Adopt a sudden change screw with a length to diameter ratio of 25.
Spinning process:
Melt temperature: 280-285 ℃ Spinning pressure: 60-90kg
Setting temperature: 150-190 ℃ Draft ratio: 4-5 times
3. Safety instructions
① Fire protection measures
Nylon 66 resin, like most organic substances, has a self ignition temperature of over 400 ℃; This polymer is not easily ignited, and in the event of a fire, water mist
Fire extinguishing with foam, carbon dioxide and chemical dry powder.
② First aid measures
Once inhaling excessive combustion mist, please move to an open and ventilated area and consult a doctor.
Once a burn is accidentally caused by molten material, the material must be cooled as quickly as possible in the cooling water, but not stirred, and medical examination must be conducted immediately.
① Before use, users should confirm the "Shenma" logo on the product packaging and confirm that the packaging is intact and undamaged.
② Please confirm that the product is packaged in aluminum foil for dry slicing. If the product cannot be used up within one hour, effective measures should be taken to seal it to prevent moisture regain.
③ Please store the product in a cool, dry and well ventilated place to prevent exposure to sunlight, rain, and keep away from ignition sources.
2. Spinning process reference
Equipment conditions: Adopt a sudden change screw with a length to diameter ratio of 25.
Spinning process:
Melt temperature: 280-285 ℃ Spinning pressure: 60-90kg
Setting temperature: 150-190 ℃ Draft ratio: 4-5 times
3. Safety instructions
① Fire protection measures
Nylon 66 resin, like most organic substances, has a self ignition temperature of over 400 ℃; This polymer is not easily ignited, and in the event of a fire, water mist
Fire extinguishing with foam, carbon dioxide and chemical dry powder.
② First aid measures
Once inhaling excessive combustion mist, please move to an open and ventilated area and consult a doctor.
Once a burn is accidentally caused by molten material, the material must be cooled as quickly as possible in the cooling water, but not stirred, and medical examination must be conducted immediately.
Special note: The information and suggestions mentioned in the above data sheet (referred to as ("this information") are provided by our company in good faith, but this information is only for customer reference and is not used as a supplier's quality assurance. Shenma makes no warranty, express or implied, and does not assume any responsibility in connection with or use of this information regarding the completeness and accuracy of this information.
Previous page
Next page
Previous page
There is no
Next page



